1
logo-mark-1

Read More About
Spreader Beam

Spreader beams convert lifting loads into compressive forces in the bar and tensile forces in the slings. Because of this, spreader beams are highly efficient in their use of material, so they’re typically smaller, lighter, and less expensive to design and manufacture than a lifting beam.

Because they use two lifting points instead of one singular lifting point, the weight of the load is distributed evenly across the beam, which eliminates the stress on a single lifting point. Spreader beams are ideal for lifting very wide or heavy-duty loads.

logo-mark-1

Spreader beams also help to control the load and when rigged properly, can reduce the chances of:
Load tipping, sliding, or bending
Crushing or damage to the load because you can control the sling angles

They can also be designed in fixed dimensions or can be engineered to allow for incremental adjustment of the sling angle, and the length of the beam itself, for off-center load adjustments

Call us now at +2 (010) 05 646 636

Or send an email to: info@unitedec-eg.com

logo-mark-1

Read More About
Lifting Beam

Lifting beams are ideal for lighter and shorter span lifts that don’t require a lot of headroom.
Because there is a single bail attachment on the top for the crane to attach to, it doesn’t require the same amount of headroom that a spreader beam does.
Spreader Beams Vs. Lifting Beams: Lifting Beam In Use
Lifting beams are ideal for situations where overhead room is a concern because it connect to the crane or hoist using a bail attachment.

logo-mark-1

Lifting beams also provide multiple lifting points underneath and can be designed with variable or fixed lifting lugs. This type of adjustability means that lifting beams can be used in many different applications and for many different types of loads. This adjustable design allows lifting beams to:

– Handle out-of-balance loads
– Control inward crushing forces
– Utilize special load securement attachments
– The rigid and heavy-duty design of a lifting beam is ideal for loads that are too weak or flexible to be lifted without support—such as long or thin sheets of metal or steel plates.

2

Call us now at +2 (010) 05 646 636

Or send an email to: info@unitedec-eg.com

logo-mark-1

Read More About
Spreader Frame

The Spreader Frame the force of joining several Spreader Beams.
The Spreader Frame or Lifting Spreader Frame can be adapted to various configurations and sizes, easy to assemble and disassemble. And they are used to lift multiple types of loads that need more than 2 lifting points.

logo-mark-1

Pictures library

LB-8286-PHOTO-Copy-scaled
download
12126470_47c9c604fd_z
1
download (1)
images
images-_1_
images-_2_
3
2
2
1